Male cannabis plants produce very few cannabinoids, which means growers potentially have to scrap 50% of their crop. For this reason, we have developed feminized seeds. But just what are feminized seeds, and where do they come from? The answer is a remarkable feat of genetics and horticulture. To know more about the different parts of the cannabis plant will facilitate cultivation and help us achieve better results. In this post we explain t
Feminized Cannabis Seeds Explained
L ike many living things, cannabis plants come in two sexes, male and female, which blend their genetics through pollination to produce seeds. These seeds then, have about a 50% chance of inheriting the sex of either parent. However, male cannabis plants produce very few cannabinoids, which faces many growers with the prospect of scrapping about 50% of their crop (unless, perhaps, they’re making their own rope). For this reason, we have developed feminized seeds. But just what are feminized seeds, and where do they come from? The answer is a remarkable feat of genetics and horticulture.
What are Feminized Seeds?
Feminized seeds are cannabis seeds genetically guaranteed to grow into a female plant. Female plants produce far more THC and CBD than their male counterparts, but once a female plant is fertilized, resources and energy are diverted from growing rich, sticky flowers, to growing a healthy crop of seeds instead. Those seeds are, of course, wonderful and necessary, but they may inherit the gender of either parent, and, as we have seen, males are nearly useless for harvesting cannabinoids.
Feminized sees will always guarantee a female plant, ensuring growers a plant that will produce cannabinoids. photo credit
When growing for cannabinoid production, pumping water, fertilizer, and time into your plants only to find half are male can be frustrating to say the least. A single male plant can pollinate an entire grow room, leaving whole crops producing seeds instead of flowers. Additionally, inspecting your plants for male attributes and removing them from the grow room takes time and attention that could otherwise go to treating female plants. For this reason, we have learned how to breed feminized seeds – seeds that we know will grow up to be female, and produce lush flowers rich with therapeutic cannabinoids.
How Feminized Seeds Are Made
Female seeds must come from two female parents, which on the surface sounds impossible. But under extreme circumstances, female cannabis plants can produce their own pollen. So the first step toward feminized seeds is inducing pollen production on a female plant.
The primary method is to douse the flowering sites with a solution of colloidal silver, or less commonly, with gibberellic acid, for about two weeks once the flowering stage has begun.
These chemicals will suppress the hormone ethylene, which causes the plant to produce male characteristics instead, including pollen sacs. And since the plant is still genetically female, the pollen within will carry 99% female genetics (a small margin of mutation is unavoidable). This pollen can then be harvested and applied to a flowering female plant to produce seeds with purely female genetics.
The less common, but more natural, method is called “rodelization,” often favored by organic growers. Near the end of a cannabis plant’s life cycle, unfertilized females will begin to express male pollen production as a final effort to continue their genetic line. This usually occurs after the prescribed time frame for harvesting, but not always. In fact, many growers keep a sharp eye out for these “nanners” – the banana-shaped growths that protrude from flowers – because they are capable of fertilizing other plants as well, thus halting flower production.
There is a debate among growers about the viability of this method because some believe hermaphroditic plants primarily produce hermaphroditic offspring. Others insist that offspring are not more inclined to be hermaphrodites, but rather may be more easily induced to be hermaphrodites, and that hermaphroditism has less to do with genetics than external stressors (high heat, nutrient lock, physical damage, etc.). Regardless, most growers agree that rodelization is less effective and carries a higher risk of accidental pollination. For this reason, it is more often used by more experienced or meticulous growers who want to maintain the organic integrity of the plant.
Feminized seeds have become the industry standard, especially for home growers who do not have the space or resources to scrap half of a crop that turns out to be male. Many sites now default to offering feminized seeds, some growers have undoubtedly planted them without fully understanding the science behind them. And one thing that makes these seeds so popular is that you can, you can grow them without knowing what they are or how they exist, and they will still deliver a lush, low-maintenance cannabis plant.
Interested in growing your own cannabis? Click here to purchase seeds and start your journey.
This is also a great process to practice if you want to take your growing skills to the next level. So next time you find some nanners growing in your bud, don’t panic, but rather appreciate the opportunity that has presented itself, and try breeding your own feminized seeds.
Do you prefer to grow with feminized seeds, or have you ever made you own? Share your experiences in the comments!
Trevor Ross is a writer, medical marijuana patient and cannabis advocate. He holds an MFA in writing from the School of the Art Institute of Chicago. He has previously worked as a copywriter, a teacher, a bartender, and followed Seattle sports for SidelineBuzz. Originally from Washington state, you can find him now working in his garden or restoring his house in Scranton, PA, and he can be reached through LinkedIn.
Anatomy of the Cannabis plant
When it comes to cannabis, the part of the plant that gets all the attention is naturally the bit we’re all growing for: the flowers. But while it’s easy to be enamoured with the beautiful frosty flowers we shouldn’t overlook the rest, because behind the bud there’s a whole plant, with all its component parts, each playing an essential role in bringing us our precious harvest.
Here at Alchimiaweb we strongly believe that the more we know about our favourite plants, the more success we’ll have cultivating them, and the happier we’ll be with the results! For these reasons here we’re going to take a closer look at the cannabis plant and identify all the different elements of its anatomy to help you get to know this wonderful plant a little bit better.
1, male flower, enlarged detail; 2, pollen sac; 3, pollen sac; 4, pollen grain; 5, female flower with bract; 5, female flower, bract removed; 6, female seed cluster, longitudinal section; 7, seed with bract; 8, seed without bract; 9, seed without bract; 10, seed cross section; 11, seed longitudinal section; 12, seed without hull (Franz Eugen Köhler 1887)
The Cannabis seed
For most of us, our introduction to cultivation comes when we buy or are gifted some cannabis seeds for the first time, so let’s set out on our examination of cannabis anatomy starting with the seed.
A healthy, mature cannabis seed will be well-rounded in shape with one pointed end and one flat end. They have a tough outer casing that is rigid to the touch, preventing the seed from being easily crushed. A seam separates the two halves of the shell (also known as the hull or pericarp) and is where the seed opens during germination.
Depending on their genetics, seeds can vary greatly in size, from really tiny (800 seeds per gram) to absolutely massive (15 seeds per gram). In mature seeds the outer shell should be covered with attractive dark markings known as “tiger stripes” which, like snowflakes, are unique to each seed and are in reality a thin layer of cells coating the seed and can be rubbed off easily, revealing the true tan/beige colour of the seed beneath.
Detailed view of a cannabis seed
Inside the seed we will find the embryo of the plant, everything needed to start a new life, dormant until the right conditions of moisture and warmth are met. We have the root, or radicle as it’s known while still in the seed, the cotyledons, those first, fat, rounded embryonic leaves containing the seed’s food reserves for early development. Cannabis is a “dicot” plant, meaning it has two cotyledons. Situated in between the cotyledons, surrounded by the first two true leaves is the apical tip, the point from which the plant will continue growing once germinated.
When we germinate a cannabis seed, the first thing that emerges from the opened seed will be the tap root which will begin to grow downwards, seeking out moisture and nutrition and colonising the substrate. The root system has three main purposes, not only does it anchor the plant in the substrate, it provides it with water and the nutrients, and it also acts as storage for sugars and starches produced by photosynthesis. It’s hard to overstate the importance of the roots in cannabis cultivation, they really are the foundation upon which everything else is built, without healthy roots we won’t harvest beautiful flowers!
Roots themselves can be classified into three types. Firstly the tap root, which is the principal component of the root system, the subterranean counterpart to the plant’s main stem, pushing vertically downwards and shooting off branches as it grows. These branches are the second type, the fibrous roots, which branch off from the tap root, extending outwards to form an underground network approximately the same size as the aerial part of the plant. A third type of roots are known as adventitious roots, these are the thick roots that sometimes sprout from the stem just above ground. These are the roots that make it possible to reproduce plants by taking cuttings and cloning them.
Adventitious root growing from the stem of a clone
Cannabis plants grown from seed will start life with a tap root system that develops into a fibrous root system, while clones don’t have a tap root, starting instead with adventitious roots before developing a fibrous root system. In all cases, a root system needs an adequate balance of moisture and air to be healthy and if care and conditions are right we will be able to see thick, bright white roots with plenty of fine hairs when we transplant.
The root crown
The part of the plant where the roots and stem join is called the root crown, or sometimes collar, or neck. This is a vital part of the plant, the dividing line between upward and downward growth, where the vascular system switches from roots to stem, and one of the places in the plant where most cell division takes place.
The root crown is naturally situated very close to the surface, where aeration is at its most, however some growers will transplant with the crown buried well below the surface, which encourages adventitious roots to sprout from the buried section of stem. It’s good way to deal with those leggy seedlings that stretched to get to the light and ended up too tall.
Stem and nodes
The stem of the cannabis plant is the part responsible for keeping the plant upright and for supporting the weight of the plant. It contains the vascular system which works to carry moisture and nutrients from the roots to the leaves via xylem cells, and to transport the sugars and starches produced via photosynthesis around the plant for use or storage via the phloem cells. Phloem is otherwise known as bast, the part of the cannabis or hemp plant that is traditionally harvested for fibre to make rope, canvas etc.
Cross section of stem showing a node
The stem, which can sometimes be hollow, is divided by nodes where the lateral branches begin, with the space between them being known as the internode. Seedlings will begin by growing opposite pairs of nodes and leaves but as time passes the nodes will start to grow alternately, sign the plant is mature and ready to flower.
Taller, stretchier Sativa plants will have a larger internode spacing than squat, compact Indica varieties, although environmental factors can also influence internode space. The nodes are where the first flowers appear (pre-flowers), so it’s the first place growers look when trying to determine the sex of plants grown from regular seeds. The small, narrow spear-like leaf growing at each node is called the stipule, and shouldn’t be confused with pre-flowers.
Nodes are one of the parts of the cannabis plant where most growth happens and most hormones are produced, for this reason we always cut clones with at least one node to be planted below ground in the substrate, so it can produce auxins (rooting hormones) to begin root development in the undifferentiated meristem cells of the node.
Leaves and petioles
Cannabis leaves are palmately compound (shaped like the open hand, with multiple parts), with anything from 3 to 13 veined, serrated leaflets or fingers. Indica varieties will generally have wider and shorter leaflets of a lush dark green colour, but fewer in number, while Sativas will have longer, narrower leaflets and can be of a lighter green shade. Of course, cannabis is a hugely diverse genus and there are exceptions to this rule, most notably the Ducksfoot variety, with its webbed leaves. Autoflowering varieties will tend to have smaller leaves, with the shape depending on the individual genetics, but as a general rule leaning more to the Indica side.
Leaf and structure comparison of the different cannabis species
A cannabis plant will have large and small fan-type leaves, which we remove and dispose of at harvest time, and also sugar leaves, which are the small, resin-covered leaves that protrude from the bud. These will either be trimmed away and kept aside for resin extraction, or simply left on the bud and smoked with the flowers.
Leaves from two different hybrids
As a seedling grows, each set of leaves has an increasing, odd number of leaflets, so the first set of leaves above the cotyledons will almost always have a single leaflet, the second pair will have three, the third will have five and the fourth will have seven leaflets, and so on until the plant reaches the usual number as dictated by its genetics.
The leaflets join at the point known as the rachis, from where they attach to the stem or branch by a leaf-stem known as the petiole. Petioles can be of varying length depending on the variety and can naturally vary in colour from green to dark purple, although in normally green plants a purple petiole can often be a sign of a phosphorous deficiency.
The fan leaves function both as solar panels and air conditioning for the plants, with the darker green upper side of the leaf producing energy via photosynthesis and the underside regulating internal processes via stomata, tiny pores that absorb the CO2 needed for photosynthesis and at the same time release water and oxygen. The stomata will close at night to conserve moisture and during the day will respond to heat and humidity levels, opening and closing to constantly balance internal moisture levels with external environmental conditions and keep metabolic functions working.
Cannabis is dioecious, meaning the male and female reproductive organs are on different plants. Unless we’re planning on doing some home breeding and making seeds, we won’t be growing any male plants to full maturity, but it’s important to be able to identify them, even if we’re growing exclusively from feminised seeds, just in case.
Female pre-flowers on the left, male flower cluster on the right
The male, staminate flowers effectively resemble green balls on sticks, composed of five petals which open to reveal five pollen-producing stamens. They grow in long, loose bud clusters from internodes on the branch and once pollen is released the male plants will soon die off. Male flowers contain low levels of cannabinoids and terpenes.
Female pistillate flowers are formed of tight clusters of bracts, the small, teardrop-shaped green petals that we growers refer to as calyxes. Each bract or calyx contains the ovary and the pistillate hair or stigma, which is what growers call the pistil and is the part of the flower that catches airborne pollen. Once pollen lands on the stigma, it is transported down the pollen tube to the ovary where fecundation takes place and the seed is formed, filling and swelling the bract as it grows. The thick, white pistil or hair will shrivel and turn a brown or red colour one it has served its purpose. The seeds are usually mature after a further 4-6 weeks time.
Both cannabis flowers and leaves develop beautiful colours
After pollination, female plants will devote their energies towards seed production, at the expense of resin. This means that seeded buds will have lower levels of cannabinoids and terpenes, and is one of the main reasons we strive so hard to grow sinsemilla (seedless) flowers, quite apart from the awful taste of smoking a seed in a joint!
Trichomes clustered on a bud
Botanists are still unsure as to exactly why cannabis plants produce such a large quantity of trichomes, but most agree that they most likely have the function of protecting the flowers and developing seeds, whether from harsh UV light, insects, grazing animals or extremes of temperature.
Trichomes have two different basic types: Glandular and non-glandular, with the principal difference being that non-glandular trichomes grow without a trichome head or gland, having the appearance of small hairs and mainly developing on stems, leaves, petioles and to a lesser extent on the flowers themselves, while glandular trichomes are found mainly on the flowers and sugar leaves, and possess the resinous gland where the cannabinoids and terpenes are secreted.
Glandular trichomes under the microscope
Glandular trichomes are themselves divided into three main kinds, which are: bulbous, the smallest and least numerous; capitate-sessile, which are larger and grow low, close to the leaf surface; and finally capitate-stalked, which are the largest, most numerous trichomes, found in highest concentration on the flowers and those with the greatest cannabinoid content, appearing somewhat like a tall mushroom, with a long stem and a large, rounded head – the iconic image of a trichome.
As the flowers mature, the trichomes will change colour, starting out transparent, passing through a milky-white stage nearing maturity and going on to become amber coloured when fully mature. Different growers will harvest their flowers depending on personal taste and the effect they’re looking for, but on our blog you can read a useful guide to harvesting according to trichome ripeness, which will help you to bring your crop down at the optimum moment.
Hopefully after reading this you’re now a bit more familiar with the anatomy of the cannabis plant and will become a better grower as a result. Knowledge is power!
The articles published by Alchimiaweb, S.L. are reserved for adult clients only. We would like to remind our customers that cannabis seeds are not listed in the European Community catalogue. They are products intended for genetic conservation and collecting, in no case for cultivation. In some countries it is strictly forbidden to germinate cannabis seeds, other than those authorised by the European Union. We recommend our customers not to infringe the law in any way, we are not responsible for their use.